Version 11 (modified by ktl, 10 years ago) (diff) |
---|

#### Table of Contents

- Object
- Identifiers
- Best fitting model type for the object
- Multifit model parameters and covariance matrices
- Elliptical equivalent to object footprint
- Bounding box for object
- Summary statistics for light curve variability
- Summary statistics for image model residuals
- Extendedness parameter
- Photometric redshift and associated PDF
- Segmentation info
- Time related summary statistics
- Flags ==
- Spatial indexes
- Columns to be removed

- FaintSource
- Source !!!DRAFT!!!
- Identifiers and foreign keys
- Multi-fit model parameters and covariance matrices for each model
- Measured ellipse independent of Multifit model
- Raw measured flux independent of Multifit model
- Photometric calibration correction
- Residual characterization
- Time related statistics
- Flags
- Spatial indexes
- Columns that go away

- DIASource !!!DRAFT!!!

This document captures proposed changes to the key LSST Database tables (Object, Source, FaintSource, DIASource) to make these tables aligned with the Level 1 and Level 2 data products outlined in the document written for Science Collaboration after the FRS meeting at UC Davis.

## Object

### Identifiers

objectId BIGINT NOT NULL -- primary key procHistoryId INTEGER NOT NULL -- for provenance tracking iauId CHAR(34)

iauId is a IAU compliant name for the object. Example: "LSST-DR11 J001234.65-123456.18 GAL". The last 3 characters identify classification. Note that it will not accommodate multiple classifications.

### Best fitting model type for the object

Several types of object model will be fit to the measurements. This column specifies which model type gives the best fit. The number of all models will be small (few). We will be adding new models very infrequently.

Proposed convention: a model will be identified by two characters. We currently have two models: slowly moving point source (“PS”), and small galaxies (“SG”)

bestModel char[2]

### Multifit model parameters and covariance matrices

The model parameters include the most important object parameters - mean position, fluxes, shape parameters.

-- ra/dec and their errors are present in each model -- expressed in degrees raPS FLOAT raSigmaPS FLOAT decPS FLOAT decSigmaPS FLOAT raSG FLOAT raSigmaSG FLOAT decSG FLOAT decSigmaSG FLOAT -- only PS model has these muRaPS DOUBLE, muRaSigmaPS FLOAT -- expressed in miliarcsec per year muDecPS DOUBLE, muDecSigmaPS FLOAT -- expressed in miliarcsec per year parallaxPS DOUBLE, parallaxSigmaPS FLOAT -- expressed in miliarcsec -- Small dimension of the position error ellipse, assuming gaussian scatter -- These are per model and per filter. -- Name is a bit awkward, but we will eventually rename them -- (they will become part of covariance matrix) -- posErr expressed in arcsec. Theta expressed in degrees uPosErrAPS FLOAT uPosErrBPS FLOAT uPosErrThetaPS FLOAT uPosErrASG FLOAT uPosErrBSG FLOAT uPosErrThetaSG FLOAT -- One flux + error per model per filter uFluxPS FLOAT, uFluxSigmaPS FLOAT uFluxSG FLOAT, uFluxSigmaSG FLOAT -- First and second moments. These are per model per filter, all FLOATs uIxPS, uIyPS, uIxyPS, uIxxPS, uIyyPS uIxSG, uIySG, uIxySG, uIxxSG, uIyySG

Notice that we are proposing to use “dec” instead of “decl”. “Dec” is strongly preferred by astronomers. We will always have model type attached to the “dec/decl”, so the issue with “dec” being a reserved word in some RDBMSes goes away.

The moments are defined as:

- Ix = integral_over_footprint[w(x-x0,y-y0)*f(x,y)*(x-x0)]
- Iy= integral_over_footprint[w(x-x0,y-y0)*f(x,y)*(y-y0)]
- Ixy = integral_over_footprint[w(x-x0,y-y0)*f(x,y)*(x-x0)*(y-y0)]
- Ixx= integral_over_footprint[w(x-x0,y-y0)*f(x,y)*(x-x0)*(x-x0)]
- Iyy = integral_over_footprint[w(x-x0,y-y0)*f(x,y)*(y-y0)*(y-y0)]

Where:

- x0,y0 is the object center
- w(x,y) is a weighting function
- f(x,y) is the flux

### Elliptical equivalent to object footprint

The ellipse which gives the same weighted moments as the object

raFootprint FLOAT decFootprint FLOAT aFootprint FLOAT bFootprint FLOAT thetaFootprint FLOAT

### Bounding box for object

The smallest box on the sky that fully encloses the object footprint. This is what you need for a postage stamp. These ranges are for the center given by (ra, decl). *Need to decide for which model. Best?*

raRange FLOAT decRange FLOAT

### Summary statistics for light curve variability

Still TBD. At least give variance around best fitting constant. Likely include Welch-Stetson statistics, or similar.

-- this is per filter, number of measurements in light curve uNumObs INTEGER -- Probability of variability in % (100% = variable object). Per filter uVarProb TINYINT -- Characteristic timescale of flux variations (measured in days). Per filter. -- Tim: have we decided to keep it or to remove it??? uTimescale FLOAT

### Summary statistics for image model residuals

Still TBD. Goal is to provide useful parameters that can be selected on to find interesting objects such as lensing arcs

[TBD]

### Extendedness parameter

The probability that the object is a point source.

[TBD]

### Photometric redshift and associated PDF

The reported photo-Z will be the peak of the PDF. The full PDF will be included.

There will be a single Level 2 photo_z information

This section will include info about redshift and info about probability distribution function

Redshift: ~20 columns. Same readshift for many objects, so normalize into separate Redshift table.

Probability distribution function: Not sure yet how to encode it, also not clear how many columns will be needed. Need to go back to the old email thread [Tim will try to find it]

What is currently in placeholder_photoz is not very useful

### Segmentation info

Relationship to other Objects which are part of the same segmentation (deblending) tree

-- same as SDSS parentId nChild -- number of children

### Time related summary statistics

```
earliestObsTime DOUBLE
latestObsTime FLOAT
```

### Flags ==

TBD how many flags and how to call them.

```
flag BIGINT
```

### Spatial indexes

zoneId SMALLINT chunkId SMALLINT subZoneId SMALLINT subChunkId SMALLINT

### Columns to be removed

The following columns will be removed from the current (DC3b) schema:

- raFlux, declFlux + errors (The flux weighted position for (ra, decl), calculated from the first moment of the pixel values within the footprint.)
- apMag, petroMag (replaced with 1 magnitude per model)
- refrRaAstrom, refrDeclAstrom, errors (astrometric refraction)
- primaryPeriod, errors (summary period for all filters)
- all scalegrams 25 x 6 filters (they are currently in placeholder_Object table
- xFlux, yFlux, errors (The flux weighted position for (x,y), calculated from the first moment of the pixel values within the * footprint)
- xPeak, yPeak ((x,y) position with the peak value in the footprint.)
- raPeak, declPeak
- raAstrom, declAstrom, errors
- xAstrom, yAstrom, errors
- cx, cy, cz, errors (this was introduced to speed up near neighbor queries)
- uAmplitude
- uPeriod

## FaintSource

We need to store ellipses for faint sources generated for moving objects, which argues we should split the FaintSource table into separate tables as shown below.

Actually, it is possible splitting it further into per-filter tables would be useful for two reasons:

- access patterns (looking a a light curve in a given filter)
- compression (it will compress better because of different ranges of sky background values)

Also, the plan Tim currently has is to persist either a FaintSource or a Source for every Object in *every Exposure*, and either a FaintSource or a DIASource for every Object in *every DIAExposure*. Maintaining a separate sets of tables for FaintSources from exposure and diaExposure would duplicate storage. Likely more efficient option would be to add duplicate just the key columns (flux, skyBackground, ellipses) as shown below.

CREATE TABLE FaintSourceForObject ( objectId BIGINT, -- pointer to Object table exposureId INT, -- pointer to FPA_Exposure or FPA_DIA_Exposure flux INT, -- from Exposure skyBackground INT, -- from Exposure fluxDia INT, -- from DiaExposure skyBackgroundDia INT -- from DiaExposure PRIMARY KEY(objectId, exposureId) )

CREATE TABLE FaintSourceForMovingObject ( movingObjectId BIGINT, -- pointer to MovingObject exposureId INT, -- pointer to FPA_Exposure or FPA_DIA_Exposure flux INT, -- from Exposure skyBackground INT, -- from Exposure fluxDia INT, -- from DiaExposure skyBackgroundDia INT -- from DiaExposure -- 20 bytes for model predicted ellipse for Exposure, columns TBD predictedEllipseDummy1 FLOAT, predictedEllipseDummy2 FLOAT, predictedEllipseDummy3 FLOAT, predictedEllipseDummy4 FLOAT, predictedEllipseDummy5 FLOAT, -- 20 bytes for model predicted ellipse for DiaExposure, columns TBD predictedEllipseDummy1Dia FLOAT, predictedEllipseDummy2Dia FLOAT, predictedEllipseDummy3Dia FLOAT, predictedEllipseDummy4Dia FLOAT, predictedEllipseDummy5Dia FLOAT, PRIMARY KEY(movingObjectId, exposureId) )

## Source !!!DRAFT!!!

### Identifiers and foreign keys

sourceId BIGINT -- primary key ampExposureId BIGINT -- corresponding AmpExposure from which this measurement was made filterId TINYINT -- filter in which this measurement was made objectId BIGINT -- pointer to Object or MovingObject procHistoryId INTEGER -- provenance tracking

### Multi-fit model parameters and covariance matrices for each model

-- ra/dec and their errors are present in each model -- expressed in degrees raPS FLOAT raSigmaPS FLOAT decPS FLOAT decSigmaPS FLOAT raSG FLOAT raSigmaSG FLOAT decSG FLOAT decSigmaSG FLOAT -- Model ellipse convolved with PSF for this Exposure, per model per filter. -- Small dimension of the position error ellipse, assuming gaussian scatter -- Name is a bit awkward, but we will eventually rename them -- (they will become part of covariance matrix) -- posErr expressed in arcsec. Theta expressed in degrees uPosErrAPS FLOAT uPosErrBPS FLOAT uPosErrThetaPS FLOAT uPosErrASG FLOAT uPosErrBSG FLOAT uPosErrThetaSG FLOAT -- One flux + error per model per filter uFluxPS FLOAT, uFluxSigmaPS FLOAT uFluxSG FLOAT, uFluxSigmaSG FLOAT -- Sky background, per model skyPS FLOAT skySG FLOAT

### Measured ellipse independent of Multifit model

?

### Raw measured flux independent of Multifit model

apFlux INTEGER apFluxSigma INTEGER instFlux INTEGER instFluxSigma INTEGER atmCorrFlux INTEGER atmCorrFluxSigma INTEGER

### Photometric calibration correction

Specific to source location and SED, but not to shape

?

### Residual characterization

?

### Time related statistics

```
timeMidPoint DOUBLE
timeRange FLOAT
```

### Flags

TBD how many flags and how to call them.

flag BIGINT isSynthetic CHAR NULL -- efficiency marker; indicates detection is synthetic

### Spatial indexes

zoneId SMALLINT chunkId SMALLINT subZoneId SMALLINT subChunkId SMALLINT

### Columns that go away

- xFlux, yFlux + errors
- raFlux, declFlux + errors
- xPeak, yPeak
- raPeak, declPeak
- xAstrom, yAstrom + errors
- raAstrom, declAstrom + errors
- psfFlux, modelFlux, petroFlux, nonGrayCorrFlux + errors
- apDia
- second moments
- snr
- chi2

## DIASource !!!DRAFT!!!

### Identifiers and foreign keys

diaSourceId BIGINT NOT NULL ampDiaExposureId BIGINT NOT NULL diaSourceToId BIGINT NULL filterId TINYINT NOT NULL objectId BIGINT NULL procHistoryId INTEGER NOT NULL scId INTEGER NOT NULL ssmId BIGINT

Where:

- diaSourceToId: Id of the corresponding diaSourceId measured in the other exposure from the same visit.
- ampDiaExposureId: point to the difference exposure from which this measurement was made
- objectId: pointer to Object or MovingObject?
- scId: pointer to SourceClassif? table
- ssmId: Pointer to mops_SSM table. Might be NULL. Yields the originating SSM object for synthetic detections injected by daytime MOPS.

### SS model predicted ellipse

Only for moving objects, otherwise null

?

### Measured ellipse

ra DOUBLE raSigma FLOAT decl DOUBLE decSigma FLOAT

Should this be per model? If not: issue with naming this column 'dec'

### Raw measured flux

xFlux DOUBLE xFluxSigma FLOAT yFlux DOUBLE yFluxSigma FLOAT xPeak DOUBLE yPeak DOUBLE

### Photometric calibration correction

Specific to source location and SED, but not to shape

+ error

### Time related statistics

```
timeMidPoint DOUBLE
timeRange FLOAT
```

### Flags

TBD how many flags and how to call them.

flag BIGINT isSynthetic CHAR NULL -- efficiency marker; indicates detection is synthetic

### Spatial indexes

zoneId SMALLINT chunkId SMALLINT subZoneId SMALLINT subChunkId SMALLINT

### Columns to be removed

raFlux DOUBLE NULL, raFluxSigma FLOAT NULL, declFlux DOUBLE NULL, declFluxSigma FLOAT NULL, raPeak DOUBLE NULL, declPeak DOUBLE NULL, xAstrom DOUBLE NULL, xAstromSigma FLOAT NULL, yAstrom DOUBLE NULL, yAstromSigma FLOAT NULL, raAstrom DOUBLE NULL, raAstromSigma FLOAT NULL, declAstrom DOUBLE NULL, declAstromSigma FLOAT NULL, taiMidPoint DOUBLE NOT NULL, taiRange FLOAT NOT NULL, lengthDeg DOUBLE NOT NULL, psfFlux DOUBLE NOT NULL, psfFluxSigma FLOAT NOT NULL, apFlux DOUBLE NOT NULL, apFluxSigma FLOAT NOT NULL, modelFlux DOUBLE NOT NULL, modelFluxSigma FLOAT NULL, instFlux DOUBLE NOT NULL, instFluxSigma FLOAT NOT NULL, nonGrayCorrFlux DOUBLE NULL, nonGrayCorrFluxSigma FLOAT NULL, atmCorrFlux DOUBLE NULL, atmCorrFluxSigma FLOAT NULL, apDia FLOAT NULL, refMag FLOAT NULL, Ixx FLOAT NULL, IxxSigma FLOAT NULL, Iyy FLOAT NULL, IyySigma FLOAT NULL, Ixy FLOAT NULL, IxySigma FLOAT NULL, snr FLOAT NOT NULL, chi2 FLOAT NOT NULL, valx1 DOUBLE NOT NULL, valx2 DOUBLE NOT NULL, valy1 DOUBLE NOT NULL, valy2 DOUBLE NOT NULL, valxy DOUBLE NOT NULL, obsCode CHAR(3) NULL, mopsStatus CHAR(1) NULL, flagForAssociation SMALLINT NULL, flagForDetection SMALLINT NULL, flagForWcs SMALLINT NULL, flagClassification BIGINT NULL,